Earthquake Causes and Effects: Geography UPSC

 

Earthquake

• An earthquake is the shaking of the surface of the Earth, resulting from the sudden release of energy in the Earth‘s lithosphere that creates seismic waves.
• Earthquake is the form of energy of wave motion transmitted through the surface layer of the earth.
• It may be due to faulting , folding, plate movement, volcaninc eruptions and anthropogenic factors like dams and reservoirs.
• Earthquake are by far the most unpredictable and highly distructive of all the natural disasters.
• Minor earth tremors caused by gentle waves of vibration within the earth’s crust occur every few minutes while Major earthquakes usually caused by movement along faults, can be very disastrous particularly in densely populated areas.

Terminology Used in the Study of Earthquakes

• Earthquake intensity
• Earthquake magnitude
• Richter Scale
• Mercalli Scale
• Fault
• Focus
• Epicenter
• Seismic wave
• Seismograph

Focus and Epicenter

• The point within Earth where faulting begins is the focus, or hypocenter.
• The point directly above the focus on the surface is the epicenter. The intensity of the earthquake is highest at the epicenter and decreases with distance from the epicenter.

Richter scale

• Richter magnitude scale is the scale to measure the magnitude of energy released by an earthquake.
• This scale was devised by Charles. F. Richter in the year 1935.
• The number indicating magnitude ranges between 0 to 9
• An earthquake that registers 5.0 on the Richter scale has a shaking amplitude 10 times that of an earthquake that registered 4.0, and thus corresponds to a release of energy 31.6 times that released by the lesser earthquake.

Mercalli scale

• The Mercalli intensity scale is a seismic scale used for measuring the intensity of an earthquake.
• It measures the effects of an earthquake
• The number indicating intensity ranges between  1 to 12

Seismic Waves

• Seismic waves are the waves of energy caused by the sudden breaking of rock within the earth.
• They are the energy that travels through the earth and is recorded on seismographs.
• The two main types of waves are body waves and surface waves.

Body waves

• Primary waves ( P-waves)
• Secondary waves ( S-waves)

Surface Waves

• Love Waves (L-waves)
• Rayleigh waves

Primary waves (longitudinal wave)-

• The first kind of body wave is the P wave or primary wave.
• This is the fastest kind of seismic wave.
• The P wave can move through gaseous, solid rock and fluids, like water or the liquid layers of the earth.
• It pushes and pulls the rock, it moves through just like sound waves push and pull the air.

Secondary waves (transverse wave)

• The second type of body wave is the S wave or secondary wave.
• An S wave is slower than P wave and can only move through solid rock.
• This wave moves rock up and down, or side-to-side.
• S-waves arrive at the surface with some time Lag.

Love Waves

• The first kind of surface wave is called a Love wave, named after A.E.H. Love, a British
  mathematician.
• It’s the fastest surface wave and moves the ground from side-to-side.

Rayleigh Waves

• The other kind of surface wave is the Rayleigh wave, named after Lord Rayleigh.
• A Rayleigh wave rolls along the ground just like a wave rolls across a lake or an ocean.
• Because it rolls, it moves the ground up and down, and side-to-side in the same direction that the wave is moving.
• Most of the shaking felt from an earthquake is due to the Rayleigh wave, which can be much larger than the other waves.

Earthquake Predicting

Classification of earthquake

1. On basis of causative factors
   • Natural
     • Volcanic
     • Tectonic
     • Isostatic
     • Plutonic
   • Artificial
2. On basis of depth of focus
   • Moderate(0-50km)
   • Intermediate(50-250km)
   • Deep focus( 250-700km)
3. On basis of human casualities
   • Moderate (deaths<50,oo)
   • Highly hazardous(51,000-1,00,00)
   • Most hazardous(>1,00,00)

World Distribution of Earthquakes

• The world’s distribution of earthquakes coincides very closely with that of volcanoes.
• Region of greatest seismicity are Circum-Pacific areas, with the epicenters and the most frequent occurrences along the ‘Pacific Ring of Fire’.
• It is said that as many as 70% of earthquakes occur in the Circum-Pacific belt.
• Another 20% of earthquakes take place in the Mediterranean-Himalayan belt including Asia Minor, the Himalayas, and parts of north-west China.
• The remaining occur in the interiors of plates and on spreading ridge centers.

Earthquake Causes

Earthquakes are caused mainly due to dis-equilibrium in any part of the crust of the earth.

A number of causes have been assigned to caused dis-equilibrium or isostatic imbalance in the earth’s crust.

(a). Natural Reasons

• Volcanic eruption
• Faulting and folding
• Upwarping and downwarping
• Gaseous expansion and contraction inside the earth.
• Plate Movement
• Landslides

(b). Man-made/Anthropogenic Reasons

• Deep underground mining
• Blasting of rock by dynamites for construction purposes.
• Deep underground tunnel
• Nuclear explosion
• Reservoir Induced Seismicity (RIS) (E.g. Koyna Reservoir witnessed Earthquake in 1967 due to RIS)
• Hydrostatic pressure of man-made water bodies like reservoirs and lakes.

Plate tectonics provides the most logical explanation of volcanoes and earthquakes.

There are 3 types of plate boundaries along which earthquake occurs

1. Convergent
2. Divergent
3. Transform

Earthquake prone areas in India

• Earthquake of mild intensity takes place daily. Strong tremors causing large scale destructions are, however, less frequent. Earthquakes are more frequent in the areas of plate boundaries, especially along the convergent boundaries.
• In India, the region of convergence of the Indian Plate and the Eurasian Plate is more vulnerable to earthquakes. E.g. the Himalayan Region.
• The peninsular part of India is considered to be a stable block. Occasionally, however, some earthquakes are felt along the margins of minor plates. The Koyna earthquake of 1967 and the Latur earthquake of 1993 are examples of earthquakes in peninsular regions.
• The experts of Indian Seismology have divided India into Four seismic zones namely Zone-II, Zone-III, Zone-IV, and Zone-V. It may be observed that the entire Himalayan region, the states of North-East India, Western and Northern Punjab, Haryana, Uttar Pradesh, Delhi, and parts of Gujarat belong to the highest and the high-risk categories zone, named as zone V and IV.
• The remaining parts of the northern plains and western coastal areas fall in moderate risk zone and a large part of the peninsular region lies in the low-risk zone.

Consequences of Earthquake

Damage to human life and property

• The deformation of the ground surface because of the vertical and horizontal movement of the earth’s crust causes huge damage and destruction to human establishments and structures.
• Example: – An urban disaster case study of the Nepal earthquake of 2015. This earthquake was of 7.8 magnitudes and was 8.2 Km deep. Nepal earthquake caused heavy casualties because of unplanned urban construction; poor designed buildings and unscientifically designed structures.
• Urban areas of Kathmandu suffered heavy damages with a death toll of 8 thousand people and an economic loss of 10 billion USD.

Landslides and Avalanches

• Tremors especially in mountain areas can cause slope instability and slope failure leading to debris down the slope causing landslides.
• The huge masses of ice may fall down snow-covered peaks due to earthquakes causing Avalanches.
• Example: – The Nepal earthquake of 2015 resulted in several avalanches on and around Mount Everest peak. The Sikkim earthquake of 2011 caused landslides and serious damage to life and property, especially the Singik and Upper Teesta hydel projects.

Floods

• The earthquake can lead to devastating disturbances to dams, reservoirs and can cause flash floods. Landslide and Avalanches which may block the river course, leading to floods.
• Example: – The Assam earthquake of 1950 produced a barrier in the Dihang River due to the Accumulation of huge debris causing flash floods in the upstream section.

Tsunami

• Tsunamis are the waves produced due to disruption of ocean basin and displacement of the huge volume of water. Seismic waves of an earthquake can displace sea floor and generate high sea waves as Tsunamis.
• Example: – The Tsunami of 26th December 2004 of the Indian Ocean was caused by an earthquake off coast of Sumatra. It happened because of the subduction of the Indian plate under the Burmese plate. It killed about 2.4 lakh people in the countries in and around the Indian Ocean.
• Fukushima Nuclear Accident – The massive Tohoku earthquake of Japan in 2011 resulted into Tsunami waves of 10m which was caused due to an undersea earthquake of magnitude 9. This destroyed the emergency generators cooling the reactors and led to the nuclear meltdown and the radioactive fallout from the Fukushima Daiichi became a worldwide concern.

Earthquake Management

Earthquake management is the organization and management of the resources and responsibilities for dealing with all humanitarian aspects of emergencies. The aim is to reduce the harmful effects of the hazards. The earthquake management includes steps from pre-earthquake risk reduction to post-earthquake recovery.

1. Risk Recognition – Certain areas are more vulnerable to earthquakes than others, so risk recognition is the first step.
2. Earthquake monitoring system/Early warning system– Making a precise forecast about the occurrence of an earthquake in a region is still a difficult proposition. Seismologists are increasingly concentrating on the aspect of earthquake forecasting.
   • It will help in reducing the impact of upcoming disasters.
   • Example: – Japan has an earthquake early warning system that uses electronic signals that reach faster than earthquake waves.
3. Structural Solution– Past earthquakes show that over 95% of the lives lost were due to the collapse of buildings that were not earthquake resistant. But, the construction of such quake-resistant buildings is more expensive than ordinary buildings. Therefore, a cost-effective solution remains a challenge for a country like India. Seismic strengthening can be done through prioritization of structures and to implement this, it is important to have an earthquake hazard map for various zones according to the vulnerability.

References: NCERT, Wikipedia